Grundfos CRIE3-11 A-CA-A-E-HQQE 1x200-240 60HZ

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). View other configurations.

$5,528.00
Part Numbers
  • CRIE3-11 A-CA-A-E-HQQE 1x200-240 60HZ
  • 99340807
Highlights...

Features

  • Rated pump speed: 3499 rpm
  • Rated flow: 15.4 US gpm
  • Rated head: 251.7 ft
  • Maximum head: 342.9 ft
  • Stages: 11
  • Impellers: 11
  • Number of reduced-diameter impellers: 0
  • Low NPSH: N
  • Pump orientation: Vertical
  • Shaft seal arrangement: Single
  • Primary shaft seal: HQQE
  • Code for shaft seal: HQQE
  • Approvals: CE,CURUS
  • Approvals for drinking water: NSF/ANSI 61
  • Curve tolerance: ISO9906:2012 3B
  • Pump version: A
  • Model: A
  • Base: Stainless steel
  • Impeller: Stainless steel
  • Material code: A
  • Code for rubber: E
  • Bearing: SIC
  • Maximum ambient temperature: 122 °F
  • Maximum operating pressure: 362.59 psi
  • Max pressure at stated temperature: 363 psi / 250 °F
  • Type of connection: FlexiClamp
  • Size of inlet connection: DN 32
  • Size of suction port: 1 1/4 inch
  • Size of outlet connection: DN 32
  • Size of outlet port: 1 1/4 inch
  • Pressure rating for connection: PN 25
  • Flange size for motor: 56C
  • Connect code: CA
  • Pumped liquid: Water
  • Liquid temperature range: -4 .. 248 °F
  • Selected liquid temperature: 140 °F
  • Density: 61.35 lb/ft³
View other configurations.
Vertical, multistage centrifugal pump with integrated frequency converter. Pump materials in contact with the liquid are in stainless steel (EN 1.4301) Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via FlexiClamps. The pump is fitted with a 1-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The operating panel on the motor terminal box features a four-inch TFT display, push-buttons and the Grundfos Eye indicator. The display gives an intuitive and user-friendly interface to all functions. The push-buttons are used to navigate through the menu structure to access pump and performance data on site and enable setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop".